Centex Mechanical Air & Heat has served our neighbors in Cedar Creek, TX and the surrounding areas since 1984. Our goal is to always provide competitive prices and expert service.
Read our reviews and find out why your neighbors have considered us to be their nearby air conditioning and heating company in Cedar Creek, TX for over 36 years.
Local Reviews
for Cedar Creek, TX
Powered by Nearby NowOur Reviews by City
Great Service!
TK - Cedar Creek, TX
Great Service !
Johnson - Cedar Creek, TX
Tim was professional, ask if I had any questions. Let me know that everything was in good shape. The appointment covered my heating evaluation, that's covered under my service plan. Thanks
Super Job!
Turocy - Cedar Creek, TX
Tim was really good and efficient. Arrived on time, most polite, and was exceptionally thorough. Good job, Centex and Tim!
Great service
Gattis - Cedar Creek, TX
Excellent service, as usual.
Smith - Cedar Creek, TX
Long term customer
Gilder - Cedar Creek, TX
Great service
Walhus - Cedar Creek, TX
Call Tech from centex mechanical did a super job of installing an ecobee thermostat and he explained to me how to use it.
Heater check
Camp - Cedar Creek, TX
Quick and easy!
Completely satisfied Mikeal solved problem at a very fair price
John c - Cedar Creek, TX
Highly recommend them
Good Service
Dunaway - Cedar Creek, TX
On time, professional, observed safety protocols.
Always great service!
Spann - Cedar Creek, TX
On time and great service
Hansen - Cedar Creek, TX
The tech was on time and very efficient.
Response from Centex Mechanical Air & Heat:
Thank you for taking the time to leave us some feedback! Here at Centex Mechanical Air & Heat we strive to create an experience that is hassle-free and efficient from start to finish. We are so pleased to hear that our tech took great care of you and provided 5-star service. We value your business and look forward to servicing your future HVAC needs!
A/C coil replacement/ipgrade
Pacatte - Cedar Creek, TX
Presented several options to repair older system.
Response from Centex Mechanical Air & Heat:
Thank you for taking the time to leave us some feedback! We are pleased to hear that our team took great care of you and we look forward to serving you in the future.
Easy to schedule. Great experience.
Smith - Cedar Creek, TX
Great service
Wenske - Cedar Creek, TX
On time and friendly.. thanks
Great Service
John - Cedar Creek, TX
Centex Heat Pump Install
Mike - Cedar Creek, TX
Centex showed up on time, employees were very courteous, they were all well groomed and looked professional, time was taken to explain the system/parts, work areas were clean when they left, and one employee even took the time and initiative to fix the chain on my daughters bike before he left! Very happy with the system they installed so far. Head and shoulders better than the old system I had, which Centex installed in 2001. That system lasted 16 years, so hoping this one gives the same service life or better.
Quick installation
Tim - Cedar Creek, TX
High quality all the way around - people, product, installation. I needed a quick replacement of the HVAC unit in a rental house. Centex Mechanical came out to inspect the existing unit (10 year old unit which was nothing but trouble from the day it was installed by another vendor). The technician explained the issues and suggested replacement options. Centex provided a great set of bids and I scheduled the install. Iban, Terrick and Julian showed up at 8:00am as scheduled and went right to work removing the old unit, pulling new control wiring and installing the new equipment. Everything was up and running by 2:00 in the afternoon.
great
Stephen - Cedar Creek, TX
Daryl W.
I found that the indoor voltage conversion system for the Reme halo was very loud. I replaced under full part warranty.
Tim D.
I performed a heating evaluation on a heat pump system and heating is operating properly at this time.
Tim D.
I performed a heating evaluation on a heat pump system and heating is operating properly at this time.
Michael B.
Upon arrival found the wire on the outside of the air handler which is normal when you don’t have enough wire to go the air handler, who ever installed the system just added wire to reach the air handler. The sound they were hearing was when the system would turn off refrigerant going back to compressor.
Michael B.
Upon arrival found the hvac system with a blank thermostat first checked the fuse it was good, I checked for voltage coming from the outside panel, I’m getting 120 on each leg but nothing across they have a bad breaker or a break in one of the lines. Told client that they have to get an electrician to care of the breaker or replace the wires coming from the panel to inside unit.
Michael B.
Upon arrival went the unit in the closet were the sound is coming from, client said the sound was coming from the coil, I turn the heat on but did not hear any noise, I asked the client when he hears the noise again if he can record it so we can an idea on where the noises coming from.
Daryl W.
I pulled out the old heat kit and coated the rust in flex seal, after drying I re installed the new heat kit. After the repair I tested the system and found it working properly. Client has paid in full.
Daryl W.
I found that the combustion pressures sensing system is bad on the furnace. I spoke with the client about their different options and they chose the hm46b. I have the part ordered at Rmi bastrop. We need to replace the switches with new tubing. Client has already paid in full.
Daryl W.
I performed the heating evaluation and found both systems operating properly at this time.
Daryl W.
I returned and replaced the indoor air circulation system, added surge protection, replaced wire harness, burner assembly, cleaned blower wheel, replaced flame safety switch, barometric tubing adjusted gas pressures, cleaned orifices and burner box. After the repairs I tested the system several times to make sure it was heating properly.
Tim D.
I performed a heating evaluation on a heat pump system and heating is operating properly at this time.
Daryl W.
I performed the heating evaluation and found that the heat kit needs to be replaced due to major corrosion and the wire melting. I also set up the zoning system per airflow limits. System is operating properly at this time. I will send a quote over to the client for repair.
Daryl W.
CONTROL CIRCUIT REPLACEMENT I returned and replaced the outdoor control board, ost, and defrost sensor. I also added surge protection and made sure all the terminals were good. I also installed surge protection on the air handler with a Reme halo in the return side of the system. When we return for the spring maintenance I recommend we install the Reme halo in the supply because by then the Reme halo should have killed all the bacteria from the dirty sock syndrome. I also made some minor electrical adjustments because the communication wires did not have a common installed and the float switch was not set up properly. After all the repairs I made sure the system was operating properly.
Tim D.
I performed a heating evaluation on a heat pump system and heating is operating properly at this time.
Michael B.
I performed the heating evaluation on the hvac system and the furnace is operating at manufacturer specifications at this time.
Tim D.
When I arrived I found heating system under normal operation. When temperatures get below 40 degrees on heat pump systems the aux heat automatically comes on to help heat pump in heating mode. System is operating at manufactures specifications at this time.
Daryl W.
I fin combed the outside condenser coil and got most of the fins open. There were a couple patches that were to damaged. I let the client see the results and he was satisfied. System is working properly at this time.
Daryl W.
I performed the heating evaluation on the furnace and found that the flame safety sensor and burner assembly need to be replaced. I also found several faults from the air circulation system. I spoke with the client about my recommendations from past experiences of the blower motor faults and he wants to move forward with replacing the indoor motor, harness, surge protection, cleaning the air circulation system. Client is ok with swapping the main control for surge protection because the board has been replaced recently. Also with replacement of the burner assembly, flame safety switch and barometric tubing. I will order all the parts from RMI bastrop. Some parts have to be ordered from the factory. This will take 1 person 4 hours or 2 people 2 hours. I let the client know that the system will probably fault again , client has paid in full.
Daryl W.
I performed the heating evaluation and found the system operating properly at this time. I did recommend to insulate the 7/8 copper line outside (2 sticks), insulate the thermostat wire with 1/2†conduit and add a drier vent cover or stove vent cover to where the line set comes out of the house. Client has accepted the quote please call to schedule. Client will pay at the time of service. Will take 1 person about an hour and bring a electrical j-box just in case.
Daryl W.
I performed the heating evaluation and found the system operating properly at this time.
Tim D.
I performed the HM17C main fuel delivery system renovation and heating is operating properly at this time.
Daryl W.
I performed the heating evaluation and found the system operating properly at this time.
Daryl W.
When I arrived I found that the zoned heat pump infinity system had faulted on a suction Over temperature. The system was operating when I arrived and cooling properly. I tested the suction temperature sensor and found it was reading properly at that moment. I let the client know I do recommend replacing the board and sensor because of past experience and that the sensor was reading properly right now. I also recommend surge protection for the indoor and outdoor, the Reme halo and maintenance. Monday morning I will get a quote together for all the recommendations and call the client to go over their options. I let the client know that the system may shut back down and see if resetting the u it works to bring it back online.
Michael B.
I performed the heating evaluation on the hvac system and the furnace is operating at manufacturer specifications at this time.
Michael B.
I Performed HK2D. I cleaned the air circulation system, the heat transfer coil media, the cabinet in and out, the wiring. I cleaned the heat pump system in and out, added voltage performance system, and added new spade connectors client paid in full.
